Do you need a well drilling permit in California’s Central Valley?
Yes: in Fresno, Kings and Tulare counties, every new water well needs a well drilling permit. The county issues it, or the city inside some city limits. A licensed C-57 driller applies for it, not the property owner. In Fresno County, drilling may not start until the driller holds a valid permit.
State law decides who may do the work. Under Water Code section 13750.5, the person responsible for drilling, deepening or destroying a well must hold a C-57 license. The section lists no owner-builder exemption.
Who applies for a well drilling permit, you or the driller?
The driller does. Fresno County tells property owners in unincorporated areas to contact a licensed driller, who gets the permit from the county. Only people with an active C-57 license may build, rebuild or destroy wells there.
Tulare County requires a permit to build, destroy or inactivate a water well anywhere in the county. All well work there must be done by a contractor with a valid C-57 license. Since December 23, 2025, the county has taken applications online, by mail and at its Visalia office.
Kings County takes well permit applications at its Community Development Agency in Hanford. The form asks for the drilling method, the annular seal depth and the sealing material. The work must follow the California Well Standards and the Kings County Water Well Ordinance.
On new and replacement water wells, we handle the county application as the licensed driller. The state Department of Water Resources (DWR) says well pump installation, repair or replacement takes a C-57 or a C-61/D-21 contractor.
What does the county check on a new well?
In Fresno County, the driller submits a Well Permit Form through the county’s Citizen Portal. A plot plan and the permit fee go with it.
Fresno County requires an annular seal at least 20 feet deep around the casing. Public water system and industrial wells need 50 feet. The driller gives the county 48 hours’ notice so staff can inspect the seal going in.
The state standard behind these rules is DWR’s Bulletin 74, the California Well Standards. It sets a 20-foot minimum seal for domestic and agricultural wells, and counties may go further. The standards were last updated in 1991. Public comment on an update is tentatively set for November 5, 2026 to January 7, 2027.
Farther out, Madera County asks for at least 48 hours’ notice to schedule an annular seal appointment. Kern County allows only neat cement, sand cement, concrete or bentonite as seal material. Drill cuttings and drilling mud may not be used.
How much does a well drilling permit cost in the valley?
Each county sets its own permit fees. The table lists the fees Fresno and Tulare counties publish. They are the counties’ fees, not our price.
| County | Permit | Published fee |
|---|---|---|
| Fresno County | New, deepened, reconditioned or repaired domestic or agricultural well | $918 each |
| Fresno County | Well destruction | $619 each |
| Tulare County | Domestic well, 1 to 4 connections | $783 ($715 application plus $68 filing) |
| Tulare County | Agricultural well | $840 |
| Kings County | Well permit | Ask the county |
Fresno County’s schedule took effect April 1, 2026. Tulare County’s fees took effect July 1, 2026, when the domestic well permit rose from $483. Kings County’s fee was not in the published sources we checked, so ask its Community Development Agency in Hanford.
The permit is one line in the price of a new well. The rest depends on the depth, casing, seal, ground, pump and tank, and the trench and electrical run. Our guide to what a new well costs breaks those numbers down.
How long does a well permit last, and what comes after drilling?
In Fresno County, a well permit is valid for 180 days. Drilling may not start until the driller holds it, so the permit comes first and the rig date follows. If your well is in another county, ask that county for its permit term.
State law gives the driller 60 days after the work is done to file a well completion report with DWR. Drillers file through DWR’s online system, and anyone can search the reports on DWR’s map.
Fresno County also wants the driller’s well log, its Notice of Completion, no later than 30 days after the work. The county then writes to the property owner to set a final inspection. After the final inspection of a new domestic well, the county samples the water free of charge when it can.
Private wells are not required to meet any water quality standards. For a fuller test, a state-certified laboratory does that work, and we can point you to one.
What does the groundwater agency have to do with your permit?
Fresno County says the county permits the installation of wells, and groundwater sustainability agencies (GSAs) regulate their use. It describes its local subbasins as critically overdrafted, with GSAs in place to make them sustainable by 2040. If you drill in one, the county asks you to check with the GSA about any limits on using the well.
For a household well, the county says domestic private well permits will usually be processed normally. Some well types, including some agricultural wells, may get more review time from the GSA.
In 2022 and 2023, drought orders had local agencies check new wells against the groundwater plan before issuing a permit. Executive Order N-3-24 ended that step on September 5, 2024.
Around Riverdale, the North Fork Kings GSA worked with Fresno and Kings counties on a coordinated review of well permit applications. Its page has the landowner sign an acknowledgement form, which the GSA signs off and sends to the county. Ask the GSA whether its steps apply to your well.
Two subbasins in the valley, Tulare Lake and Tule, are on state probation. There, a household well using 2 acre-feet a year or less, for domestic purposes only, is a de minimis user. Those wells are typically exempt from state reporting and fees.
Who issues the permit inside city limits?
Inside some city limits, the city is the permitting agency. DWR’s list of well permitting agencies includes the City of Kingsburg, so a well inside Kingsburg’s limits goes through the city. Outside city limits, the county issues the permit.
Fresno County tells people with a well question inside an incorporated city to contact that city directly.
What happens to the old well when you drill a replacement?
In Fresno County, a well left unused for a year counts as abandoned. The exception is when the property owner shows plans to use it again. All abandoned wells must be destroyed, and only someone with an active C-57 license may do that work. It takes its own permit, $619 in Fresno County.
DWR puts the duty to destroy an abandoned well on the well owner, under the Health and Safety Code.
Before you plan a replacement, rule out the pump. Our guide to no water from the well covers what to check first. If your well has gone dry, ask us about the well replacement assistance programs that serve valley households. We can point you to the right program and help you get the application started.
Self-Help Enterprises serves nine counties, Fresno, Kings and Tulare among them. It helps domestic well owners with emergency, interim and permanent access to water.
How do you get started on a new well?
Start with a free on-site estimate. The estimate spells out the depth range, the casing, the seal, the pump and the tank for your property, from the well records nearby. Then we handle the county application as the licensed driller.
Big River Drilling is a licensed C-57 well drilling contractor based in Riverdale, working Fresno, Kings and Tulare counties. See what water well drilling with us includes, or call or text (559) 867-3806 for a free on-site estimate.